Recycle Mother Baby Machine
HSN 8477
GREEN N ECO SOLUTION are the authorized trader of Mother Baby Recycling Granule Plant or Recycling Granule Plant for reuse of all type of scrap PP/HD/LD.
This machine offers the reprocessing extrusion with techno economic solution to furnish plastic
granule needs. A variety of granulation process to recycle all type of plastic or thermoplastic material
is processed through the hopper and the lump purge is fed into the secod extruder i.e. baby extruder
machine which gives good results.
Specification of 125 mm Recycle Plant
Mother Extruder
-
Processed Item - Recycle Material PP/HD/LD
-
Total Connected Load - 55 KW
-
Power Supply - 3ph. 50/C/S,440 V AC
-
Barrel - Made of alloy steel 41- B Gas Nitrated
-
Extruder Base Frame - Made of heavy channel
-
Manin Drive - 40 HP 1440 RPM With AC Drive
-
Heater - Heat Proof Heater ( Ceramic Heater)
-
Screen Changer - 10”
-
Screw - 125 mm * 110 serew made of alloy steel. 41-B Duly Gas Nitrated & Hard Chrome
-
Gear Box - Helical Gear Box. No. 225 make Excel Greaves Heavy
-
Pannel Board - 48*48 MM Digital Parameter with AC Drive
-
Extruder - 125 MM extruder mounted on a study frame of steel section
Baby Extruder
-
Frame - Rigid Frame made from channel & sheet
-
Screw - 120 mm made of alloy steel ratio 12:1
-
Barrel - 180 mm made of alloy steel
-
Main Motor - 20 HP 1440 RPM
-
Heater - Ceramic heater
-
Output - 125 Kg/hr
-
Pannel Board - Para meter with AC Drive
-
Water Tank - S.S.
-
Weight - 900 Kg
-
Gear Box - Helical Gear box. No.200 make Excel greaves heavy
Jacquard Loom Machine
HSN 8446
This machine offers the torsional rigidity & sturdiness to sustain such high speed loads Using the most advance Spherical Linkage transmission gearbox ensures minimal load on weft insertion by reducing pick-up acceleration & reducing transfer-load, thus allowing delicate yarns to operate at higher speeds.
Specification of 180 cm Jacquard Loom
-
Type - Sapcae 4 linkbar for weft intersection, weft filled from left and handover in middle
-
Main Motor - Super servo output torque as pratical load
-
Density of Weft - 4-200 Picks / cm
-
Let Off - Elcetronical Servo Let off. Warp beam plate Dai. 800 mm
-
Reed Width - 180cm
-
Weight - 950 Kg
-
Power Consumption - 0.75 kw
-
Output - 50 unit /day
-
Shedding - Option 1408,2688,5376,6144,12288 hooks
-
Take up - Elcetronical Servo take up, max cloth rolling Dai.600 mm
-
Speed - Design Speed 600 RPM, Optimum Speed ~ 550RPM. Max Weft intersection rate 1150 m/min with Jacquard Speed 280 RPM to 330 RPM
-
Selvadge Formation - Big Jacuard with leno selvadge or rotary LENO controlled by
stepper motor ( single or two side type for choice)
